Beitian BE-220 GPS module glonass TTL level BN-220 upgrade version for APM pixhawk CC3d naze32 F3 F4 flight controller R

Технические характеристики: фирменное наименование: Бейтян Item Name: BE-220Chip: M10050Frequency: GPS L1 C/A, QZSS L1S (SLAS), GLONASS L10F, BDS B1I, Galileo E1B/C, SBAS EGNOS, GAGAN, MSAS and WAASWorking Mode: GPS, GLONASS, BDS, GALILEO, SBAS and QZSS.* By default, GPS+GALILEO+SBAS+QZSS joint positioning is used. If you have other needs, you can change the mode by command.* It is recommended to use: GPS+GLONASS+SBAS+QZSS+GALILEO or GPS+BDS+SBAS+QZSS+GALILEO joint positioning mode. Tracking Sensitivity: -167dBmReacquisition Sensitivity: -160dBmCold Start Sensitivity: -148dBmHot Start Sensitivity: -160dBmPosition Horizontal Accuracy: 2 m CEPТочность скорости: 0,05 м/с Dynamic Heading Accuracy: 0.3 deg1PPS Time Accuracy: RMS 30ns, 99% 60ns. Cold Start Acquisition Time: 29sHot Start Acquisition Time: 1sAuxiliary Start Acquisition Time: 1sData Output Support Rate: 4800bps to 921600bps, Default 38400bps. Data Output Level: TTL Level. Data Output Protocol: NMEA, UBXData Output NMEA Message: RMC, VTG, GGA, GSA, GSV, GLLData Output Update Rate: 0.25Hz-18Hz, Default 1HzData Output Second Pulse: 0.25Hz-10MHz can be configured, the default period is 1s, and the high level lasts for 100ms. Operational Altitude Limits: 80000mOperational Speed Limits: Operational Acceleration Limits: Power Consumption of VCC: DC Voltage 3.6V-5.5V, Typical: 5.0VPower Consumption of Current: Capture 50mA/5.0VDimension: 22.0mm*20.0mm*6.0mm. Weight: 5.3gConnector: 1.00mm 4pins connector. Operating Temp: -40 °C ~ +85°CStorag